HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver Module for MMF #J9150A

HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver Module for MMF #J9150A

$13.90

HF P/N: AXS85-192-M3

MFG P/N: J9150A

Shipping Cost: Free Shipping on orders over USD $300

Availability: in stock

loading...

HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver Module for MMF #J9150A

$13.90

HF P/N: AXS85-192-M3

MFG P/N: J9150A

Shipping Cost: Free Shipping on orders overUSD $300

Availability: in stock

Description

HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver Module for MMF

QSFP+ Extender Solutions
Used for long-distance transmission under 40G QSFP+. The QSFP+ Port could be transferred/converted into 4x SFP+ port by Direct Attach Copper (DAC) technology under very low insert lose.
Learn More
Learn More
Cisco 10GBASE-LR SFP+ Optical Transceiver Connectivity Solutions
What is the simplest cabling solution for connecting two Cisco switches with two 10GBASE-LR SFP+ optical transceivers?
Learn More
Learn More
HiFiber's HPE J9150A Compatible 10GBASE-SR MMF multi-mode 850nm 300m transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. 10gbase-sr SFP module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm.The transmitter section uses a Vertical Cavity Surface Emitted Laser (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Features

  • Operating data rate up to 10.3Gbps
  • 850nm VCESL Transmitter
  • Distance up to 300m @50 / 125 um MMF
  • Single 3. 3V Power supply and TTL Logic Interface
  • Duplex LC Connector Interface, Hot Pluggable
  • Compliant with MSA SFP+ Specification SFF-8431
  • Compliant with 10G 1200-M5-SN-I and 1200-M6-SN-I FC standard
  • Compliant with 8.5G 800-M5-SN-I and 800-M6-SN-I FC standard
  • Compliant with 4.25G 400-M5-SN-I and 400-M6-SN-I FC standard
  • Compliant with 2.125G 200-M5-SN-I and 200-M6-SN-I FC standard
  • Compliant with 1.0625G 100-M5-SN-I and 100-M6-SN-I FC standard
  • Compliant with IEEE 802.3ae 10GBASE-SR/SW
  • Operating Case Temperature Standard:0°C~+70°C

Applications

  • 10GBASE-LR at 9.953Gbps
  • 10GBASE-LW at 10.3125Gbps
  • 1000Base-LX Ethernet
  • 8x FC at 8.5Gbps
  • 4x FC at 4.25Gpbs
  • 2x FC at 2.125Gpbs
  • 1x FC at 1.0625Gbps
  • Other Optical Link
Specifications/Parameters

Specifications/Parameters

HF P/N
AXS85-192-M3
MFG P/N
J9150A
Brands
HPE
Manufacturer
HiFiber
Max Distance
300m
Wavelength
850nm
Form Type
SFP+
Max Data Rate
10.3Gbps
Interface
LC Duplex
Fiber(Cable) Type
MMF
DDM Support
Yes
TX Power (dBm)
-6~-1dBm
Temp. Range
0 to 70°C (32 to 158°F)
Rx Sens. (dBm)
< -11.1dBm
HTS-Harmonized Code
8517706000
Warranty & Service

Warranty & Service

Warranty Service Pack1*:     All HiFiber's products share 1-year standard warranty.
Warranty Service Pack2*:     Enhanced Item (Apply to Online order at HiFiber.com)


DAC Cables (Passive)
3-Year Warranty
DAC Cables (Active)
3-Year Warranty
AOC Cable
3-Year Warranty
Fiber Optic Transceivers
3-Year Warranty
Switch, Convertors
1-Year Warranty
NIC/CNA Cards
1-Year Warranty
Optical System
1-Year Warranty
Patch Cords
3-Year Warranty
Power Adapter
0.5-Year Warranty
Consumer cable
3-Month

* Remark:
  1. This warranty right only lies in the initial purchaser of HiFiber.com products and is not transferrable.
  2. This warranty right do not apply to special-offer products. For special-offer products, we will remark the warranty period under the product.
  3. The warranty clause does not include any product damage caused by improper installation, accident hazards, natural disasters, abuse, misuse, low power or over-voltage, incorrect operation, poor/ bad environmental conditions and any unauthorized disassembly, repair or modification.
  4. The warranty clause does not apply to products with modified internal electronic information, EEPROM information, etc.  Unauth
  5. The warranty clause does not include system problems caused by third-party software, upgraded software or upgraded IOS of the connecting devices.
* Exemption Clause:
  1. The information above is the complete warranty provisions for HiFiber.com products, which is the only effective warranty promise and will replace all written or verbal warranty commitments. Other warranties out of this clause, including decrees in other countries, provinces or locations and any indicative warranty clauses that is nonaggressive, merchantable or suited for some specific purposes, will not be recognized by HiFiber.com.
  2. HiFiber.com has not authorized its products to be used in those critical parts that is related to device life, or other applications in which product failure or mal-function may cause injury or death. If HiFiber.com products are used in military equipments, traffic control equipments, disaster prevention systems or medical equipments, HiFiber.com will not assume any liability for any possible casualties or property loss.
  3. HiFiber.com warranty responsibility only confines to maintenance, replacement and interest-free refund services. Any voilation of the warranty clause or law will be compensated only by maintenance, replacement or interest-free refund. To the maximum extent of law permission, HiFiber.com will not be held the responsibility to its customers or end users for any damage, expenses, loss of data, loss of income, loss of savings, loss of profits and any unavoidable or indirect damage resulted from the purchase, use or incapable function of HiFiber.com's product

15-Day money back Guarantee:

15-Day money back guarantee applies to all products sold by HiFiber.com provided that the items are new, undamaged, unmodified and in good resalable condition. If you are not satisfied with the product, you can apply return within 15 days.
All freight charges, transaction costs (bank charge or Paypal cost, etc) are the responsibility of the customer.

Returns are not acceptable if:
  1. The products are proved to have been abused, misused, replaced, repaired, or modified.
  2. After 15 days of delivery, returns are not acceptable. If the items are still under warranty period, customer could ask for repair or replacement. 
  3. No Return agreement was reached with a HiFiber.com sales representative before Returns.
  4. Return process is not done based on HiFiber.com Return instructions.

more...

About Us

HiFiber.com is a leading supplier of fiber connectivity network solutions for Data Center and HPC. The main products include compatible module, direct-attach cable(DAC), active optical cable(AOC), Jump Cable, CWDM/DWDM system, network integrated card(NIC), etc. HiFiber.com is with the goal of providing quality guaranteed and cost effective products for customers all around the world.


HiFiber.com features a huge inventory of over US $1.0 million buffer stock that ready to shipped out in the same day of customers' purchase(in most cases) with no minimum orders or restocking fees.


What makes HiFiber.com completely different is the lifetime technical support. That's right, call anytime during business hours and get the help you need whether you made your purchase last week, last month, or last year! Our products are compliant with CE, RoHS, FCC, ISO9001, ISO14001 etc. and all products are environmentally friendly.

About HiFiber Image
Q & A
Reviews

Customer Reviews

No Review0 out of 5 stars
  • 5 star 0%
  • 4 star 0%
  • 3 star 0%
  • 2 star 0%
  • 1 star 0%
Share your thoughts with other customers
loading...