40GBase-SR4 QSFP+ 850nm 100m DOM MMF Transceiver Module Customized #QSFP-SR4

40GBase-SR4 QSFP+ 850nm 100m DOM MMF Transceiver Module Customized #QSFP-SR4

$69.00

HF P/N: QSFP-SR4

Shipping Cost: Free Shipping on orders over USD $300

Availability: in stock

loading...

40GBase-SR4 QSFP+ 850nm 100m DOM MMF Transceiver Module Customized #QSFP-SR4

$69.00

HF P/N: QSFP-SR4

Shipping Cost: Free Shipping on orders overUSD $300

Availability: in stock

Description

40GBase-SR4 QSFP+ 850nm 100m DOM MMF Transceiver Module Customized

QSFP+ Extender Solutions
Used for long-distance transmission under 40G QSFP+. The QSFP+ Port could be transferred/converted into 4x SFP+ port by Direct Attach Copper (DAC) technology under very low insert lose.
Learn More
Learn More
Cisco 10GBASE-LR SFP+ Optical Transceiver Connectivity Solutions
What is the simplest cabling solution for connecting two Cisco switches with two 10GBASE-LR SFP+ optical transceivers?
Learn More
Learn More
Cisco 40G QSFP+ to 8LC Active Cable Connectivity Solutions
One port end of this active cable is 40G QSFP+ and the other end is LC, SC, FC and ST connectors. Utilizing multi-mode cable, providing 4 independent data transmission channels and 4 data receiving channels
Learn More
Learn More
Cisco 40G QSFP+ SR4 Transceiver Connectivity Solutions
To achieve direct connection between 40G QSFP+ SR4/CSR4 optical transceivers, MPO optical patch cord is essential. Details are shown in Figure
Learn More
Learn More
HiFiber's Customized Compatible 40GBase-SR4 MMF multi-mode 850nm 100m transceiver is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module, terminated with MPO multifiber connectors. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4 and compatible with IEEE 802.3ba 10GBASE-SR. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. The transceiver is RoHS-6 compliant and lead-free per Directive 2011/65/EU. HiFiber's QSFP-40G-SR4 Module supports link lengths of 100m and 150m respectively on laser-optimized OM3 and OM4 multimode fiber cables. It primarily enables high-bandwidth 40G optical links over ribbon fiber cables terminated with multi-fiber connectors, and could also be used along with ribbon to duplex fiber breakout cables for connectivity to four 10GBASE-SR optical interfaces.

Features

  • 4 independent full-duplex channels
  • Up to 100 meters transmission over OM3 MMF
  • Up to 150 meters transmission over OM4 MMF
  • Up to 11.2Gbps data rate per channel
  • MTP/MPO optical connector
  • QSFP MSA compliant
  • Digital diagnostic capabilities
  • Capable of over 100m transmission on OM3 multi-mode ribbon fiber
  • CML compatible electrical I/O
  • Single +3.3V power supply
  • XLPPI electric interface (with 1.5W Maxpower)
  • Operating case temperature: 0°C~70°C
  • RoHS-6 compliant

Applications

  • Rack to rack
  • Data Center
  • Infiniband QDR, DDR and SDR
  • 40G Ethernet
Specifications/Parameters

Specifications/Parameters

HF P/N
QSFP-SR4
Brands
Customized
Manufacturer
HiFiber
Max Distance
100m
Wavelength
850nm
Form Type
QSFP+
Max Data Rate
44.8Gbps
Interface
MTP/MPO
Fiber(Cable) Type
MMF
DDM Support
Yes
TX Power (dBm)
-7.6~1dBm
Temp. Range
0 to 70°C (32 to 158°F)
Rx Sens. (dBm)
< -9.5dBm
HTS-Harmonized Code
8517706000
Warranty & Service

Warranty & Service

Warranty Service Pack1*:     All HiFiber's products share 1-year standard warranty.
Warranty Service Pack2*:     Enhanced Item (Apply to Online order at HiFiber.com)


DAC Cables (Passive)
3-Year Warranty
DAC Cables (Active)
3-Year Warranty
AOC Cable
3-Year Warranty
Fiber Optic Transceivers
3-Year Warranty
Switch, Convertors
1-Year Warranty
NIC/CNA Cards
1-Year Warranty
Optical System
1-Year Warranty
Patch Cords
3-Year Warranty
Power Adapter
0.5-Year Warranty
Consumer cable
3-Month

* Remark:
  1. This warranty right only lies in the initial purchaser of HiFiber.com products and is not transferrable.
  2. This warranty right do not apply to special-offer products. For special-offer products, we will remark the warranty period under the product.
  3. The warranty clause does not include any product damage caused by improper installation, accident hazards, natural disasters, abuse, misuse, low power or over-voltage, incorrect operation, poor/ bad environmental conditions and any unauthorized disassembly, repair or modification.
  4. The warranty clause does not apply to products with modified internal electronic information, EEPROM information, etc.  Unauth
  5. The warranty clause does not include system problems caused by third-party software, upgraded software or upgraded IOS of the connecting devices.
* Exemption Clause:
  1. The information above is the complete warranty provisions for HiFiber.com products, which is the only effective warranty promise and will replace all written or verbal warranty commitments. Other warranties out of this clause, including decrees in other countries, provinces or locations and any indicative warranty clauses that is nonaggressive, merchantable or suited for some specific purposes, will not be recognized by HiFiber.com.
  2. HiFiber.com has not authorized its products to be used in those critical parts that is related to device life, or other applications in which product failure or mal-function may cause injury or death. If HiFiber.com products are used in military equipments, traffic control equipments, disaster prevention systems or medical equipments, HiFiber.com will not assume any liability for any possible casualties or property loss.
  3. HiFiber.com warranty responsibility only confines to maintenance, replacement and interest-free refund services. Any voilation of the warranty clause or law will be compensated only by maintenance, replacement or interest-free refund. To the maximum extent of law permission, HiFiber.com will not be held the responsibility to its customers or end users for any damage, expenses, loss of data, loss of income, loss of savings, loss of profits and any unavoidable or indirect damage resulted from the purchase, use or incapable function of HiFiber.com's product

15-Day money back Guarantee:

15-Day money back guarantee applies to all products sold by HiFiber.com provided that the items are new, undamaged, unmodified and in good resalable condition. If you are not satisfied with the product, you can apply return within 15 days.
All freight charges, transaction costs (bank charge or Paypal cost, etc) are the responsibility of the customer.

Returns are not acceptable if:
  1. The products are proved to have been abused, misused, replaced, repaired, or modified.
  2. After 15 days of delivery, returns are not acceptable. If the items are still under warranty period, customer could ask for repair or replacement. 
  3. No Return agreement was reached with a HiFiber.com sales representative before Returns.
  4. Return process is not done based on HiFiber.com Return instructions.

more...

About Us

HiFiber.com is a leading supplier of fiber connectivity network solutions for Data Center and HPC. The main products include compatible module, direct-attach cable(DAC), active optical cable(AOC), Jump Cable, CWDM/DWDM system, network integrated card(NIC), etc. HiFiber.com is with the goal of providing quality guaranteed and cost effective products for customers all around the world.


HiFiber.com features a huge inventory of over US $1.0 million buffer stock that ready to shipped out in the same day of customers' purchase(in most cases) with no minimum orders or restocking fees.


What makes HiFiber.com completely different is the lifetime technical support. That's right, call anytime during business hours and get the help you need whether you made your purchase last week, last month, or last year! Our products are compliant with CE, RoHS, FCC, ISO9001, ISO14001 etc. and all products are environmentally friendly.

About HiFiber Image
Q & A
Reviews

Customer Reviews

No Review0 out of 5 stars
  • 5 star 0%
  • 4 star 0%
  • 3 star 0%
  • 2 star 0%
  • 1 star 0%
Share your thoughts with other customers
loading...